Pearl Art Studio Kiln Services Policy

 

Pearl Art Studio offers kiln services to support local ceramic makers while protecting shared equipment and ensuring consistent cone 6 firings. Please read this policy carefully before submitting work.

​

ELIGIBILITY​

Kiln services are available to:

- Pearl Art Studio members

- Former Pearl ceramics students

- Members of the public producing small-scale, non-production ceramic work

All work must meet the materials and size requirements outlined below. Pearl Art Studio reserves the right to refuse any work that does not meet these guidelines. An intake form must be filled out when dropping off work with clay and glaze information. 

​

MATERIAL REQUIREMENTS​

Clay:

- Cone 6 clay bodies only

- Commercially manufactured clay

- Clearly labeled with manufacturer and cone range

- No unknown, reclaimed, or experimental clay

 

Glaze:

- Cone 6 glazes only

- Studio glazes are encouraged

- Outside glazes must be commercially made and clearly labeled cone 6

- No homemade, ash, crystalline, or experimental glazes

- Pearl Art Studio reserves the right to refuse any glaze at its discretion

​

SIZE & FORM LIMITATIONS​

- Work must fit on a standard kiln shelf

- No excessively thick forms

- No sealed or enclosed forms

- Maximum size subject to approval at intake

​

PRICING (PUBLIC RATES)​

Bisque Firing:

- $25 per half shelf

- $45 per full shelf

​

Glaze Firing:

- $30 per half shelf

- $55 per full shelf

​

Small individual pieces may be priced per piece at Pearl’s discretion.

Members and former students receive discounted rates.

​

PAYMENT​

- Payment is required before firing

- Work will not be fired until payment is received

​

TURNAROUND TIME​

- Firings occur when the kiln is full

- Typical turnaround time is 2 - 4 weeks

- No rush firings

​

LABELING​

- All work must be clearly labeled with the maker’s name

- Pearl Art Studio is not responsible for unlabeled or improperly labeled work

​

LIABILITY​

Ceramics is inherently unpredictable. Pearl Art Studio is not responsible for cracking, warping, glaze defects, breakage, or firing outcomes. By using kiln services, you accept all risks associated with firing ceramic work.

Thank you for helping us keep the kiln safe, consistent, and available to the community.